LLC
Russian versionVersion for print
  • 1-30 MHz Baluns BR-800-1(2.5/4/6/11/16)

    Please visit our partner in EU
    Internet shop www.duplexers.eu
    Catalog www.ik-telecom.com



    Please visit our partner in EU
    www.duplexers.eu

    1-30 MHz Baluns BR-800-1(2.5/4/6/11/16)

    Electrical specifications

    Model Balun
    Operating frequency band, MHz 1-30
    Impedance ratio
    BR-800-1 1:1
    BR-800-2.5 1:2.5
    BR-800-4 1:4
    BR-800-6 1:6
    BR-800-9 1:9
    BR-800-11 1:11
    BR-800-16 1:16
    Insertion loss, dB 0.2-0.4
    Input power, not more, W 800
    Connector SO-239
    Weight, kg 386
    Length/Width/Depth, mm 118х100х60
    Impedance, Ohm 50
    * The antenna power capacity is defined by the duration of transmission, type of transmission, its frequency, SWR and the ambient temperature.

    Balun is designed for the transformation of antenna high resistance to standard impedance of 50 Ohm with simultaneous current symmetry. This unit is used to ensure the predictive antenna directivity diagram, eliminating the cable radiation, that in turn reduces the interference level. In the receive mode the balun eliminates «antenna effect» of the cable and significantly reduces the consumer interference level. Balancing transformer (balun) is equipped with ferrite “binoculars”. The balun is thoroughly protected against moisture due to the polyether sealing. The fiberglass cover protects against the direct moisture penetration as well. The hole located at the bottom of the balun close to the connector ensures the condensation drain and blowing of internal elements of the unit.

    VSWR diagram


    BR-800


    The information provided on this page is not an official offer.
    To verify actual parameters contact the sales department before ordering.