WLAN 2400-2485 MHz Collinear antennas A-3W, A-7W, A-10W

radial@radial.ru
www.radial.ru

Please visit our partner in EU
Internet shop www.duplexers.eu
Catalog www.ik-telecom.com

A-3W
(wall mount.)

A-7W

A-10W

Electrical specifications

Model A-3W A-7W A-10W
Operating frequency band, MHz 2400-2485 2400-2485 2400-2485
Gain,dBi 3 7 10
VSWR, not more than 1.5 1.5 1.5
Front-to-back ratio, dB present
Polarization vertical
Electrical downtilt
Max. power input, W 10 10 10
Sector in H-plane (-3 dB) 360° 360° 360°
Sector in E-plane (-3 dB) 56° 14° 6.5°
Impedance, Ohm 50 50 50

Mechanical specifications

Model A-3W A-7W A-10W
Dimensions (LxWxH), mm 35x35x312 35x35x840 35x35x1330
Weight, kg 0.1 0.28 0.38
Rated wind velocity, m/s 50 50 40
Radiator PCB PCB PCB
Radome Fiberglass, PVC
Mounting on a mast diam. 35-70 mm or on a wall
Connector N-female (TNC optional)

These spike antennas possess an ideally circular radiation pattern in horizontal plane and a gain of 3, 7 and 10 dBi, correspondingly. The antenna A-3W is recommended to be applied as the inside-the-office antenna, where it is not possible to use the antennas with high gain. The models A-7W and A-10W have an increased gain and a tilt of the radiation pattern in the vertical plane what ensures the most efficient reception and transmission of SHF energy near the earth surface where the subscribers are positioned. These models are applied in the case of the central disposition of the base station or in the case when the objects are non- significantly distanced.

A-3W E-plane pattern

A-7W E-plane pattern (2.485 GHz)

A-10W E-plane pattern (2.4 GHz)


The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.