 |
 
|
 | | Electrical specifications
| Model |
AGS-19V |
AGS-19A |
AGS-19U
|
| Operating frequency band, MHz |
140-174 |
300-360 |
400-490
|
| Impedance, Ohm |
50
|
| Amplifier gain, dB |
5-21 |
5-21 |
5-21
|
| 1 dB compression point, dBm |
22,3
|
| Noise figure, dB |
0,6
|
| Voltage, V |
5-14
|
| Current, mA |
120
|
|
|
Mechanical specifications
| Model |
AGS-19V |
AGS-19A |
AGS-19U
|
| Weight, kg |
0,3
|
| Length/Width/Depth not more |
130x90x250
|
| Connectors |
N-female
|
| |
Amplifier AGS-14 is aimed for the amplification of high frequency signal with the gain coefficient being installed on-the-fly. The product consists of an amplifier chip, low-noise feeding voltage stabilizer, a filter of the noise suppression in the feeder circuit, the feeder voltage indicator, a controlled attenuator. The gain coefficient amplifier is determined by the position of slide switches at the built-in eight-position switch unit.
The application of such an amplifier will allow optimal adjusting the receiving channel of the trunking system without the necessity to use a soldering iron.
Amplifiers typical gain-frequency characteristic
AGS-19U
|
AGS-19V
|
|
|
The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.
|
|
